Sea Hawk Sharkskin Black Bottom Paint

Description

Other
Sea Hawk Sharkskin Black Bottom Paint
Product SKU:
S-H-6145GL
Item Condition:
New
MSRP
8.99
Sale Price
9.99
Product Description:
The Sea Hawk Sharkskin is a traditional 45.2% copper based hard modified epoxy bottom paint. Made to aggressively combat all types of marine fouling including sea grass, green weed, barnacles, and other fouling organisms found in both salt and fresh water. Can be applied over most antifouling coatings.
Features:
Better color consistency for color matching
Highest grade cuprous oxide available
Most effective copper release rate
Consistent viscosity means better flow and rolling ability
--------------------------------------------------------------------------------------------------
How to Apply Sea Hawk SHARKSKIN Bottom Paint
Sea Hawk SHARKSKIN Bottom Paint is easily applied by brush, roller, or spray. When rolling, use only a high-quality short nap 3/8” roller cover. Apply using thin coats. For the smoothest possible finish, thin the paint approximately 10% using Sea Hawk 2053. SHARKSKIN has a tendency for settling to occur, especially if the paint has been on the shelf for several months. Thoroughly mix the paint before using. Before using, check the sides and bottom of the can to make sure all the pigment has been mixed in.
Finish:
Semi-Gloss
Coverage:
320 Sq Ft
Application Method:
Bursh, Rolling, Airless Sprayer
Maximum Roller Thickness:
3/8” Nap
Number of Coats:
2
Wet Film Thickness:
5.0 mils
Dry Film Thickness:
3.1 mils
Application Temp:
50° F Min/ 95° F Max
Thinner:
If necessary maximum 10% with Sea Hawk 2033
Colors Available:
6145 Black , 6142 Blue
Previously Painted Surfaces
Known Compatibility of existing antifoulant
Power wash to remove any loose paint or other contaminants.
Scuff sand with 80 grit sandpaper, remove all residue and let dry.
Apply minimum 2 coats of SHARKSKIN. Allow 3-6 hours between coats and a minimum overnight dry.
Unknown Compatibility of existing antifoulant
Power wash to remove any loose paint or other contaminants.
Scuff sand with 80 grit sandpaper, remove all residue and let dry.
Apply 1 coat of 1277 Barrier coat primer or 1283 Island Primer
Apply minimum of two coats of SHARKSKIN. Allow 3-6 hours between coats and a minimum overnight dry.
Poor condition of existing antifoulant
If previous coating is cracking, peeling, or flaking strip the antifoulant with stripper, sanding, or commercial blasting.
Once stripped refer to the Bare Fiberglass Application Guidelines.
Bare Fiberglass
To prepare the surface it is important to remove all contaminants first. Scrub the surface with detergent soap and a stiff brush. Using either S-80 Wax N’ Grease Killer or S-90 De-Wax Etch & Cleaner scrub the surface and rinse thoroughly.
Sand to a uniform dull looking surface with 80-100 grit sandpaper and rewash with S-80 Wax and Grease Killer or S-90 De-Watch Etch & Cleaner
Once cleaned and sanded, seal the surface with 2-3 coats of Tuff Stuff. Apply the second coat once the first has a tacky feel.
Apply minimum of two coats of SHARKSKIN. Allow 3-6 hours between coats and a minimum
Sanding Method:
Sand to a uniform dull looking surface with 80-100 grit sandpaper and rewash with S-80 Wax and Grease Killer or S-90 De-Watch Etch & Cleaner
Apply minimum of two coats of SHARKSKIN. Allow 3-6 hours between coats and a minimum overnight dry.
Non-Sanding Method:
Apply one thin coat of Sea Hawk 1266 no more than .3-.5 mils wet film thickness and allow to dry for 1 hour.
Apply minimum of two coats of SHARKSKIN. Allow 3-6 hours between coats and a minimum overnight dry.
Bare Wood
Clean the surface and ensure it is dry and free of contaminants.
Sand to a uniformly frosty, dull looking surface with 80-100 grit sandpaper.
Apply two coats of SHARKSKIN. Apply first coat thinned 20% and let dry overnight. Apply two more coats allowing 3-6 hours between coats and a minimum overnight dry.
Steel/Aluminum Hulls
Sandblast to near white or white metal SSPC-SP-10 or equivalent. Remove residue by brush or compressed air.
Copper Based Antifoulant Application
Apply two coats of S-76 Primer, the first coat applied within 1 hour of sanding. Allow the first coat to dry to a tacky feel then apply second coat.
Seal the surface by using 3-4 coats of Tuff Stuff. Apply the first coat within 8 hours of applying the last coat of S-76.
Apply minimum of two coats of SHARKSKIN, allow 3-6 hours between coats.
Copper-Free Antifouling Application for Aluminum Only
Seal the surface with 2 coats of Tuff Stuff. Apply the first coat and allow the surface to dry to a tacky finish.
Apply minimum of two coats of SHARKSKIN, allow 3-6 hours between coats and a minimum overnight dry.
Above information sourced from Sea Hawk Bottom Paint Application Instructions
About Us
Wholesale Marine is an on line boating store founded to provide customers an easy way find top-quality products at the lowest prices. With associates who possess decades of combined boating experience, Wholesale Marine can truly provide expert customer service.
Shipping Method
Wholesale Marine currently ships all merchandise UPS or truck freight. All orders with in-stock items placed by 2:00 PM EST Monday - Friday are shipped that same day. Orders placed after 2:00 PM on Friday and orders place on Saturday and Sunday will ship on the following Monday. Orders that qualifying for free shipping may be shipped  any method and carrier chosen by Wholesale Marine.  Free shipping offers are only valid within the continental U.S.
There are certain items that we cannot ship outside of the Continental United States. Items that cannot be shipped outside of the Continental United States include all name brand watersports products and hazardous materials, such as but not limited to paint, oil, resins and adhesives.
*Canadian Customers: Please be aware that any brokerage, duty, or customs fees are out of our control.
Returns
Wholesale Marine will gladly refund almost any merchandise within 30 days from original purchase date. To return just send merchandise prepaid, in its original unused condition. Please include a copy of original Wholesale Marine invoice. We will then refund the merchandise amount by the original payment method. Shipping costs are not refundable. No returns for special order items, electronics, cut lengths of material or hazardous materials, such as but not limited to paint, oil, resins and adhesives.
Please ship all Returns to:
Wholesale Marine
147 Circle Freeway Drive
Cincinnati, OH 45246
Connect with Us
Find us on:
Powered by SixBit's eCommerce Solution